Skip to main content

Building Information Modeling improves the productivity of all the key building professionals

Building Information Modeling often referred as BIM by AEC professionals is a highly influential technology or process that helps in solving out the complications of key building professionals such as architects, engineers and fabricators. Building construction does not comprise of one single construction activity, instead of that it is a combination of numerous activities which results into the development of a building. Prior to the commencement of actual construction that means in the preconstruction phase solutions are provided for engineering problems with the support of BIM.



By optimizing cutting edge technology, design and construction professionals build the entire project in a virtual environment. For accomplishing this task AEC professionals have to make use of building design software Revit, project review software Navisworks and 3D modeling and rendering software 3ds Max. The entire intent of utilizing Revit in preconstruction is to develop high performing design for architecture, structure and MEP which can eliminate most of the problems that come across during on site construction. Unmatched design is developed by design development team in Revit as it helps in facilitating the distribution of design information among team members. This helps in preventing mistakes in the design which can otherwise take place if information has not been distrusted effectively among BIM modelers working on a project. So, we can say that Revit which is purposely developed for reinforcing Building Information Modeling helps in improving the productivity of modelers as well as the quality of architecture, structure and MEP design.

Now let’s jump to the role of Navisworks in the execution of building project. Navisworks is optimized for reviewing the designs of different building disciplines which are created with the help of Revit Architecture, Revit structure and Revit MEP. Complete multidiscipline models can be reviewed in Navisworks and potential construction problems can be identified by AEC professionals during early design phase. This helps design and construction professionals in foreseeing the actual challenges of final construction and in finding out solutions for them.

So, in this way with the execution of BIM modeling and clash detection services in preconstruction, productivity of all the potential building professionals can be increased as design and construction complications are dealt strictly during this period.  

Comments

Popular posts from this blog

A brief account on BIM’s expansion over the years

Building Information Modeling has a dramatic history when it comes to its expansion in the landscapes of AEC industry over the years. BIM which is also known as Virtual Design and Construction has a dominant presence in AEC industry because of the fact that is has the potential to realize project outcomes and can control them significantly as per requirement. In short design and construction professionals can attain superior control over project outcomes by analyzing multidiscipline models. Well, Building Information Modeling evolved as a concept some four decades ago but it was not practiced by AEC professionals in the industry at that time. For approximately ten years since it first appeared in the journal, the term ‘BIM’ used to be seen only in research papers. BIM as a technology and a process started to be implemented in construction projects some thirty years ago. So once AEC professionals started using BIM in construction they never looked back to their sluggish performanc...

Determine the size of your family according to your project requirement in Revit!

Revit is considered the best choice by architects, engineers, BIM modelers and technicians working in AEC industry for creating families. Families are basically used by BIM modelers while executing Revit modeling services. That makes Revit and Revit modeling services an integral part of construction project execution. Family size matters a lot when it comes to designing a building. In Revit technicians have the luxury to control family size as per the requirement of their project. If in case a smaller size door is required for one of the rooms in the building it can be easily created by using the Family Editor tool of Revit. Revit Family Editor has vital features for developing custom families. The Family size can be controlled by BIM modelers by assigning required dimensions for the family.   In other words the geometry of the family can be easily controlled by assigning parameters in Revit. Take an example of door family; it’s up to Revit modelers what dimensions they want ...

Structural drawings: What is the role of Revit structure and Tekla Structure in their development?

Among all kinds of construction drawings it is really difficult to develop structural drawings as they are of highly complex nature. For developing strong and durable structural framework, the first step is to develop high quality structural drawings which can effectively describe structural design.  For the comprehensive understanding of structural design numerous kinds of technical drawings which may include detailed sketches, plans and working drawings etc have to be developed by drafters and detailers on the instructions of structural engineers.   In this blog I would like to focus on the development of Steel fabrication drawings and erection drawings which are created by steel detailers when they execute Structural Steel Detailing Services with the support of Revit structure or Tekla Structure.    Both Revit structure and Tekla structure are most widely used software packages which are utilized by steel detailers for the development of d...